Brand：Bruker XGLAB
Model：DANTE DPP
· Provide best possible energy resolution.
· Provide good performance at fast count-rate.
· Handle very-high input count-rate.
· Optimized to be used in combination with CUBE.
· Reconfigurable and adaptable to several applications.
· Programmable trapezoidal digital filtering.
· Full-spectra acquisition system
· List (Event) mode operation with time-stamp
· Advance triggering system with gating, VETO, or any digital bus
· Burst spectra mode with individual spectrum logging via I/O bus
· Digital wave-scanner for direct preamplifier acquisition (in debug mode)
· Effective for lab instrumentation, scientific experiment, or as OEM component
· Daisy-chain mode enable to scale-up the system to large number of DPP channels with relatively small equipment.
· DAQ user interface, simple DLL libraries, or LabVIEW
· Input signal: Pulsed reset (positive or negative polarity)
· Dynamic: (typ: +/- 1.5V).
· Analog gain: hardware selectable.
· Digital gain: available for fine-tuning desired gain.
· Input impedance: high or 50 Ohm.
· Connectors: coaxial SMA or LEMO for analog input, coaxial SMA of LEMO digital input or output, 2mm header for logical triggering (for elemental mapping synchronization).
· Maximum input rate: 10 Mcps.
· Maximum output rate: 1.8 Mcps @ ICR of 5 Mcps
· Output info: Input Count Rate, Output Count rate, live-time.
· Output signals: Real time trigger
· Spectrum acquisition: typ 4K channels (expandable)
· Individual event time-stamp: 8ns precision
· Full-waveform input acquisition: length up to hundreds milliseconds at max speed (62.5 MHz).
· Peaking times: selectable down to 32ns.
· Flat top: selectable down to 32ns.
· Spectra acquisition down to 1ms in burst mode.
· Zero dead-time between two subsequent spectra.
· Stable operation above 95% dead-time.
· Very compact single-board DPP design: 10 cm x 6 cm.
· Low power consumption: 3 W
· Advance triggering system with gating, VETO, or any digital bus
· Burst spectra mode with individual spectrum logging via I/O bus
· USB 2.0 or Ethernet TCP/IP
· Simple DLL libraries, Graphical User Interface or LabView VIs.
Click to learn more product information.
Contact our application team immediately: 021-37018108, info@boyuesh.com
Tel：86-021-37018108
Fax：86-021-57656381
Email：info@boyuesh.com
Address：Room 301, 28 Songjiang Hi-tech park, 518 Xinzhuan Road, Songjiang District, Shanghai
